Are you looking for a step-by-step solar installation guide? Energy production by renewable energy resources comes along with a lot of benefits. The industries can get the best solar solutions that will help them improve their bottom line. The use of solar energy is significantly increasing across the globe. Solar energy is renowned for decreasing the high billings.
However, the installation of solar panels costs a lot of money. Before installing solar panels, ensure to select the highly exposed point to direct sunlight. Before installing solar systems, make sure to note each angle that may be a barrier stopping the sunlight from being absorbed by the solar plates.
The steps for the installation of solar panels and system is given below:
1.
Base
Installation
Roof ground mounts or the flush bases are fixed before installing the solar system. These mounts are seated at a slightly tilted angle (36 degrees almost). These bases and mounts are intended to provide structural support to the solar panels.
2.
Solar
Panel Installation
The next step that comes after the mounting of the base is the installation of solar panels. The process is completed by tightening the bolts and the nuts of the solar system with the mount.
3.
Electric
Wiring
Once
the base or mount is fixed, the next step will be the electrical wiring. These connections
can be placed in the following series:
· Series
Connection
· Parallel Connection
4.
Connect
The Solar System With The Inverter
After
you are finished with the electric wiring, the next thing you require is to
connect the solar system with the solar inverter. However, the wires are
connected in the following manner:
· The
positive wire of the system is connected to the positive terminal of the inverter
· The negative wire of the system is connected to the negative terminal of the inverter
Finally, the solar grid is connected to the battery and grid to produce energy.
5.
Connection
of Solar Inverter To The Solar Battery
Finally, after connecting the solar system to the inverter, the next step involves the connection of the solar inverter to the solar battery. The connecting pattern is the same as mentioned above (positive will be connected with positive and vise versa). The battery is necessary to keep an efficient energy back-up to avoid sudden black-outs.
6.
Connection
of Solar Inverter To The Grid
The next step is the connection of the solar inverter to the solar grid. The connection is enabled by connecting a standard plug to the main electricity connection.
7.
Start
the Solar System
Once you are done with the solar system's wiring and installation, you can now start the inverter and use the solar system for efficient energy production.
Bottom Line
The
following will help you learn about the basic solar installation process. Solar
installation is coslty but can help you get rid of the heavy billings. Also, it
is a one-time investment that can save you from sudden power cut-downs.
No comments:
Post a Comment